Control Panel Instructions - Hamilton Beach HealthyCook HB4006 Operating And Safety Instructions Manual

7. When you hear the timer bell, the set preparation time has elapsed. Pull the
pan out of the appliance and place it on a the trial framework.
8. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pan back into the appliance
and set the timer to a few extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Hot-air fryer and place
it on trial framework.
The pan and the ingredients are hot and hot fryer. Depending on the type of the
ingredients in the I fryer, steam may escape from the pan.
10. Empty the pot into a bowl or onto a plate.
Tip: To remove large or fragile ingredients, lift the ingredients out of the basket
by a pair of tongs
11. When a batch of ingredients is ready, the Hot-air fryer is instantly ready for
preparing another batch.

Control Panel Instructions

Start/pause Sync End
Operation Instructions:
1. Plug in power, all icons light on for 1 sec. and off soonest. The buzzer will be
on. Icon for power on is light on
Power on
Pre-heat Sync
8
2. Press the Power on icon, icons L,R and L=R are light on. They can be selected.
3. If press L=R, icon L=R is flashing ，If press L, icon L is flashing. If press R, icon
R is flashing. and six pre-set foods icons will be on.
4. Icons operation.
4.1 Press timer side "+" and "-" adjust cooking time up and down. It's one
minute iterval.
4.2 Press temperature "+" and "-" adjust temperature up and down. It's 5℃
interval. When setting the max. and min. temperature, the up and down icon will
be off.
4.3 If press the pre-heat icon, default setting 200℃ 5min (not suitable for
Dehydrated function). Press icon L, left container will be pre-heated. Press R, right
container will be pre-heated. If press L=R, both containers will be pre-heated
together. The max pre-heat time is 60 min.
4.4 After time and temperature set, press "start/pause" icon, unit start to
work. The seleted icons are on and others are off.
4.5 After setting, if press "POWER ON", unit will be back to "OFF" situation. 4.6 When
both containers are working together, press "start/pause" icon,
buzzer will on for one time, unit stop working. Press again "start/pause" icon, unit
will be keep on working.
4.7 If want to pause one of the container, press L or R first, then press
"start/pause" icon.
4.8 When unit into "paused" mode, unit will work again until press
"start/pause" icon.
4.9 When unit working, timer and temperature can be adjusted again. Press L
or R and set timer or temperature. In 5mins, unit will work again.
4.10 When unit working, if press "POWER ON", unit will be back to "OFF"
mode with buzzer on one time.
4.11 When unit no working (setting time arrived) or paused, unit will be in
"OFF" mode in 5mins.
4.12 When finish cooking, buzzer with 5 times and into mode "OFF". Screen is
showing "End" for 5mins. "POWER ON" icon is light on.
9