Table of Contents
Advertisement
Tamper Detection
To check for tampering press and hold keys '2' and '4' together for 3 seconds. The
'3' key will glow RED to indicate tampering or GREEN to indicate no tampering. You
Press and hold '2' and '4'
can reset the tamper detection by opening the safe through one of the authorized
entry points.
Toggle Stealth Mode
To toggle the sound ON/OFF press and hold keys '1' and '3' together for 3 seconds.
If the '2' key glows GREEN and beeps, the sound is ON; if the '2' key glows RED, the
Press and hold '1' and '3'
sound is OFF.
Toggle Travel Mode
Save battery life by disabling the proximity sensor, fingerprint sensor, keypad, and
Bluetooth features. To toggle travel mode ON/OFF press and hold keys '1' '3' and '5'
Press and hold '1'
together until the safe beeps and the keys light up. If the keys glow RED and beeps,
'3' and '5'
the safe is disabled; if the keys glow GREEN and beeps, the safe is operational.
View Battery Status
To check the battery level press and hold the '5' key on the keypad (3 seconds). Keys
from '1' to '4' will glow GREEN or RED to indicate the battery level. See pages 08 to
Press and hold '5'
09 for more information.
Delete Fingerprints
To delete fingerprints press and hold keys '3' and '5' together (3 seconds) until all
keys turn RED then enter your master code. This will remove all the fingerprints. You
Press and hold '3' and '5'
can delete individual fingerprints in the Vaultek
then enter master code
15 Vaultek
®
If 1 key glows green: 20%-40%
If 1 key glows red: 10%-20%
If 1 key blinks red: less than 10%
app.
®
Toggle Interior Light
To toggle interior light press and hold '1' key for 3 seconds. With the light toggled
ON it will illuminate when the safe opens and you can also adjust the brightness in
Press and hold '1'
the app.
Interior Light Time
To add additional time to the interior light press and hold the '2' key for 3 seconds.
The light will turn on for an additional 10 seconds.
Extension
Press and hold '2'
Toggle Bluetooth
To toggle the Bluetooth ON/OFF press and hold keys '2' and '5' together. If the
'3' and '4' glow RED Bluetooth is OFF. Re-enable by pressing and holding '2' and '5'
Press and hold '2' and
together until all keys light up RED then enter your master code. When Bluetooth is
'5' then enter the
toggled OFF all app functions will be disabled and your safe is undiscoverable.
master code
Toggle App Unlock
By default, the unlock feature on the Vaultek
this feature press and hold keys '1' and '4' followed by the "PROGRAM" button
Press and hold '1' and '4'
together for 3 seconds. If keys '2' and '3' turn GREEN the unlock feature is enabled.
then "PROGRAM" button
If keys '2' and '3' turn RED the unlock feature is disabled.
Toggle Smart Key
To toggle Smart Key entry modes press and hold the '4' key then "PROGRAM" button
together for 3 seconds. The keypad will indicate each mode as listed on page 16.
Modes
Press and hold '4'
You may also alternate modes in the Vaultek
then "PROGRAM" button
Toggle Alert of
If Alert of Manual Unlock is on, and someone opens the safe with either the key or
by picking the lock, the keypad will start flashing. To toggle Alert of Manual Unlock
Manual Unlock
press and hold keys '2' and '3' then "PROGRAM" button together for 3 seconds. The
Press and hold '2' and '3'
keypad will flash GREEN indicating enabled or RED indicating disabled. If ON and
then "PROGRAM" button
activated it can only be cleared by entering master code. Default is OFF.
app will be disabled. To toggle
®
app.
®
16 Vaultek
®
Advertisement
Table of Contents
