Windows 95 Modem Configuration - Nokia 8850 Connection Manual

Infrared connection guide

Hide thumbs Also See for 8850:

2.4 Windows 95 Modem configuration

After proper IrDA support installation and configuration next step is to configure a new modem for

Windows 95. If you have already installed PC Suite for Nokia 8850 then there is no need to add a new

modem, so you can skip this part. This procedure requires a so called .INF file, which contains

information about used modem. You can find that .INF file from CD-ROM or from

http://www.forum.nokia.com/.

Setting up a modem in Windows 95 is a straightforward process.

1. Open Control Panel ( Start | Settings | Control Panel )

2. Select Modems

3. Select Add

4. Select Other

5. Select Don't detect

6. Select "Have disk..." and browse to locate the N8850.inf file.

(and go further by selecting Next option...)

4(6)

Table of Contents