Nokia 8250 User Manual page 40

2. Enter the desired notes. For
example, press
(shown as f). The phone plays
each note after it is entered
(unless the phone tones are off).
3. To adjust the characteristics of
the note:
• Note duration:
shortens (-) and
lengthens (+) the duration of
the note or rest. The default
duration is 1/4. The duration
is shown in front of the note,
e.g. 16d denotes a note d with
duration 1/16.
Pressing and holding a note
key lengthens the note by
half, indicated by a dot after
the duration, e.g. 8.a.
• Rest:
pause) of the same duration
as the previous note. The
default duration of a rest is
one quarter note (1/4). The
rest is indicated by the -
character.
• Octave:
for new notes. The octave is
shown as a number after the
note (e.g. e1).
• Pitch:
sharp (indicated by
of the note), e.g. #f. The pitch
selection is not available for
notes e and b.
for note f
inserts a rest (i.e.
sets the octave
makes the note
# in front
M e n u f u n c t i o n s
4. To edit the notes:
• and
cursor right or left,
respectively.
• Clear deletes a note or a rest
to the left.
5. After you have completed the
tone, press Options, scroll to one
of the functions below, and press
OK.
Play: Plays back the notes.
Save: You can name the tone
and add it to the end of ringing
tone list.
Tempo: You can select the
desired tempo for the tone (in
beats per minute).
Send: You can send the
composed tone as a text
message.
Clear screen: Deletes all the
notes from the display.
Exit: You can exit the Composer
menu.
Example: Here is an example of a
ringing tone. Enter the notes and
play them as described above.
Change the different aspects of the
tone (notes, octave, duration, etc.)
and consider how these changes
affect the tone.
16.a2 16d2 16#f2 16a1 16d2 16#f2
8a2 1- 8-
16.b2 16d2 16#f2 16a1 16d2 16#f2
8a2 1- 8-
move the
29