Kawai CA901 Owner's Manual page 11

[POWER] button
This button is used to turn the digital piano on/o .
Be sure to turn o the instrument aft f f er playing.
[MASTER VOLUME] slider
This slider controls the master volume level of the
digital piano's built-in speakers or headphones, if
connected.
Display/To T T uch panel
Use the display/touch panel to select functions
using the buttons and icons displayed on the
screen, and adjust settings for those functions.
The display/touch panel also displays settings
status information such as the names of selected
sounds, USB memory devices, and Bluetooth
connectivity.
CHECK
A transparent sheet has been applied to
the display/touch panel. Remove the
transparent sheet before use.
[USB TO DEVICE] port
This port is used to connect a USB memory device.
[PHONES] jacks
These jacks are used to connect stereo
headphones to the digital piano. Mini stereo plug
and standard stereo plug connectors are provided
for convenience, and both can be used
simultaneously, allowing two pairs of headphones
to be connected at the same time.
Headphone hook
This hook can be used to hang headphones when
not in use.
[LINE IN] jacks
These jacks are used to connect to the output jacks
of other electronic instruments or audio
equipment to output sound from the external
equipment through the speakers of this
instrument.
[LINE OUT] jacks
These jacks are used to output sound from this
instrument through other external equipment
such as mixers or ampli ers, or when recording on
audio equipment.
[USB TO HOST] port
This port is used to connect the instrument to a
computer using a USB "B to A" A A type cable in order
to send and receive MIDI data.
[USB for UPDAT A A E] port
This port is used to connect a USB memory device
used to update the touch panel.
[AC INLET] jack
This jack is used to connect the power cable.
Preparation
11