Before First Use - AEG MCD2540E-m Manual

Before first use

Setting the clock
After your microwave oven is first
plugged-in or after a power failure, the
clock display will flash to indicate that
the time shown is not correct. Before
using the microwave oven, adjust the
clock through the procedure described
below but starting on Step 2.
To set the clock, proceed as follows:
1. Press the "Clock" key until the
hours start to flash.
2. Turn the rotary encoder to set the
required hours.
3. Press the "Clock" key until the
minutes start to flash.
4. Turn the rotary encoder to set the
required minutes.
5. To finish, press the clock key again.
Child lock
The oven functioning can be blocked
(for example to stop it being used by
children).
1. To Block the oven, press the "Auto
Cook" and "Clock" key for
2seconds. A lock will appear in the
display.
2. To unblock the oven repeat the
operation.
Interrupting a cooking cycle
You can stop the cooking process at
any time by pressing the Stop key once
or by opening the oven door.
In both cases:
• Microwave emission is stopped
immediately.
• The grill is de-activated but is still very
hot. Danger of burning!
• The timer stops automatically,
indicating the operating time that is
left.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will
be evenly cooked.
To restart the process, close the door
and press the Start key
Kitchen timer
This function can be used as a minute
minder. When using this function you
are not defining how long you wish the
timer to run but you are defining at
which time you wish the alarm to
sound.
7. Press the "Delayed Start" key.
8. Press the "Clock" key until the
hours start to flash.
9. Turn the rotary encoder to set the
required hours.
10. Press the "Clock" key until the
minutes start to flash.
11. Turn the rotary encoder to set the
required minutes.
12. Press the "Start" key.
MCD2540E -m 153