SmarTemp Control 3.0
Installation - Operating Instructions
Operation from Mobile Application
The SmarTemp 3.0 with Bluetooth connectivity can be controlled via a smartphone or other mobile device.
After downloading the app, you will be asked to agree to Terms and Conditions and our Privacy Policy the first
time you wish to use the application.
The device will scan for nearby devices when the application is started. Be sure your SmarTemp 3.0 has
Bluetooth enabled by going to Settings – Bluetooth – Enabled before starting the application for the first time. If
you are connecting for the first time you will need to enter an access code.
The first time your SmarTemp is discovered, you will be prompted to enter
a 4-digit code that will be displayed on the SmarTemp screen. Enter that
code and press SEND.
Note: Air heater screen is shown, coolant heater similar.
The home screen shows the current status of the heater. Refer to the table
below for detailed information.
10
Need help?
Do you have a question about the SmarTemp Control 3.0 and is the answer not in the manual?