Emergency And Fire Protection - Vivint SkyControl Panel Getting Started

Emergency and
Fire Protection
The Emergency
of the panel. Use this button in case of an emergency.
Just pressing the button does not trigger an alarm.
When you press the button, the Emergency screen appears with three options:
Using the Emergency Buttons
Press and hold the type of Emergency button you need for at least
1.
2-3 seconds.
2. Vivint will receive your signal immediately and a monitoring
representative will confirm the emergency through Vivint Live.
If no one at your home responds via Vivint Live, the representative will
call your emergency contacts. If the first emergency contact cannot be
reached, Vivint will dispatch authorities and continue trying to reach
your emergency contacts.
Understanding Fire and Carbon Monoxide Alarms
Your home may be installed with fire and CO detectors as part of Vivint's overall home
protection system. This protection is enabled 24 hours a day, 365 days a year.
In the event of a fire or CO gas emergency, the installed detectors automatically
activate your security system. The detectors will emit a loud alarm, and the panel will
also emit loud intermittent alarms to warn you. The panel alarm continues for four
minutes or until you enter your PIN at the panel. (NOTE: See the complete User Guide
at support.vivint.com for more information about fire and CO alarms.)
button is located at the bottom left
8