Page 1
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk USER’S MANUAL Contact Us! CEILING FAN ES10187US US:cs.us@costway.com Do NOT return this item. UK:cs.uk@costway.com AU:cs.au@costway.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1) Tools Ready • Philips screwdriver • Blade screwdriver • Adjustable pliers or wrench • Step ladder • Wire cutter • Electrical tape • Lmpact drill 2) Parts Inspection Before You Start Hanger bracket 5-inch downrod 10-inch downrod Canopy Please read all instructions carefully. Retain instructions for future reference.
Page 3
3) Installation of Bracket Install the fan blades to the motor in order and screw on the fan blade screws in turn. (Figure 2) Use wood screws X4 to fix bracket for wooden or false ceiling. Wood screws Use screw Beam Use expansion screws to fix bracket for concrete ceiling before that will need to drill dia.8mm expansion bolts.
5) Lamp Installation 4. Mount the bracket onto outlet box Locking by the screws, spring washers and flat 1. Connect the corresponding wires washers. at the bottom of the lamp and the 5. Hang the ball joint and the fan onto motor.
Page 5
8) Hanging Ceiling Fan Schematic diagram of controller installation The controller Place the lobes in the hanger and turn the pipe so the groove on the lobes engages the lugs on the dome (inside the hanger). The lug groove must engage the hanger lug. RF wireless digital transmission technology, one—to—one control, the weight rate is less than one part of a million (if there is any damage, please contact the after-sales service.)
2. Keep ceiling fans clean regularly. Only use a soft brush or a lint—free 2. When the remote control cannot control the controller, please check cloth to clean it gently. Do not use a damp cloth or other destructive whether the battery is loaded correctly; cleaner.
Need help?
Do you have a question about the ES10187US and is the answer not in the manual?
Questions and answers