MTI FREEDOM MICRO II Product Manual page 8

SPEEDBRACKET™ MERCHANDISING
Tighten center locking security screw on the
5
SpeedBracket™ to secure the bracket arms in place
around the device. After tightening screws, wiggle the
arms to ensure they have fully engaged the lock teeth.
7
Tighten center screw again until tight. Tighten the other
bracket security screw for additional security.
www.MTIGS.com | T:800.426.6844
FREEDOM MICRO ® II MECHANICAL MANUAL
Place pressure on the top/bottom and the sides to try
6
and move arms. This is to find if the arms did not seat
correctly.
8
Place device back onto puck.
MTI P/N 063-00410 rev B ©2022 MTI All Rights Reserved
8