MTI FREEDOM MICRO II Product Manual page 3

BASEPLATE OPTIONS - ADHESIVE
1 Attach the baseplate with the included screws.
3
Place Micro position in desired location. Press down on
the base plate for 10 seconds for full adhesive contact.
Allow 24 hours for full adhesion.
ADHESIVE POSITION REMOVAL
1
Do not cut power cable.
www.MTIGS.com | T:800.426.6844
FREEDOM MICRO
2
4
2
® II MECHANICAL MANUAL
Peel the red film from the adhesive.
3
MTI P/N 063-00410 rev A ©2022 MTI All Rights Reserved
3