International Prefix; Data Or Fax Calls; Data Transfer - Nokia 6235 User Manual

3. Scroll to the calling card of your choice, select
4. Press the end key to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.
5. Press and hold the call key for a few seconds until
6. When you hear the tone or system message, select OK.

International prefix

You can store an international dialing prefix into your device. When you enter + at
the beginning of a phone number, your device automatically inserts the international
dialing prefix that you have stored after you press the call key. See "Insert dialing
codes," p. 39.

Data or fax calls

Data or fax calling is a network service. See "Network Services," p. 5. If your wireless
service provider supports this feature, you can set up the device to send or receive
data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the device on a stationary surface
with the keypad facing downward. Do not move the device by holding it in your
hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia website at http://www.nokiausa.com.
1. At the start screen, select
Incoming data/fax
2. Select one of the following options:
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
3. When you are finished receiving the fax or data call, repeat steps 1 and 2 and
select Normal.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.
At the start screen, select
rate display > Graphic
Menu > Settings
call.
Menu > Settings
or Off.
Options > Select
Card call
> Call settings >
> Call settings > Data/fax calls
S e t t i n g s
> OK.
is displayed.
Data/fax calls >
> Data
57