Tone Settings; Time And Date Settings - Nokia 6235 User Manual

S e t t i n g s

■ Tone settings

You can adjust the ringing volume, keypad tones, and more for the active profile.
See "Customize a profile," p. 52, for more information on profile settings.
Select Menu > Settings
Incoming call alert—Select how the device notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert—Turn the vibrating alert
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones—Turn warning and confirmation tones
Alert for—Define which caller groups the selected profile will accept or decline.
See "Caller groups," p. 40.

■ Time and date settings

Clock
At the start screen, select
Show clock or Hide
Date
At the start screen, select
Show date or Hide date,
Set the auto-update of date and time
Auto-update is a network service. See "Network Services," p. 5. If your wireless
service provider supports this feature, you can allow the digital network to set
the clock, which is useful when you are out of your home area, for instance when
you have traveled to another network or time zone.
At the start screen, select
update of date & time
If you use the Auto-update of date & time
you may be prompted to enter the time manually. Network time will replace the
time and date when you re-enter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
54
> Tone settings
Menu > Settings
clock, Set the time,
Menu > Settings
Set the date, Date
Menu >Settings
> On, Confirm first, or Off.
and one of the following:
On or Off.
On or Off.
> Time and date settings
Time zone or Time format.
> Time and date settings
format, or Date
> Time and date settings
option while outside your digital network,
> Clock >
> Date >
separator.
> Auto-