Table of Contents
Advertisement
Specification
Environmental Characteristics
Temperature and Humidity
Operating temperature
Storage temperature range
Operating relative humidity range
Storage relative humidity range
Physical characteristics
Category
Board Dimensions
Front Panel Connector
Configuration and Accessories
For most applications, the AL-1032 needs to be configured with a backplane.
RTI Backplane
RTIs are used to format signals into common bus types and are mounted onto SLSC chassis
using screws. These screws will be provided with the RTI board and will have a corresponding
threaded hole on the top rear of the SLSC chassis. The RTI board will have several holes which
the screws will fit through.
Mount the RTI with the external connectors (to measurement devices) and external references,
facing away from the chassis. The available connectors will vary depending on which RTI is
being used. The figure below shows an example RTI and how it is mounted on the SLSC
Chassis.
ALIARO reserve the right to vary from the description given in this data sheet and shall not be liable for any errors.
0 °C to 40 °C
-40 °C to 85 °C
10% to 90%, noncondensing
5% to 95%, noncondensing
Condition
Excluding front handle
www.aliaro.com
Value
144.32mm x 30.48mm x 281 mm
(H x W x D)
1 x HD44, 2 x RJ45
Advertisement
Table of Contents
