Table of Contents
Advertisement
Setting Up The AL-1032
Complete the following steps to get started with the AL-1032 Board.
Software Setup
The AL-1032 Multi-Function I/O Board is intended to be used with the following pieces of control
software:
NI VeriStand
xMove Configurator
(Optional)
Product Setup
When using the AL-1032 Board, the following hardware components are required:
-
NI SLSC Chassis (SLSC-12001) and all associated components listed in the
SLSC Chassis manual. This manual is located on NI's website.
-
Cross Connection Board
-
Rear Transition Interface (RTI)
Use the following steps to setup the AL-1032 Board in an SLSC Chassis:
Warning – Please complete the following steps with all devices powered off and with
users and systems being safely grounded.
Choose a slot in the SLSC Chassis to install the AL-1032 Board. Before inserting the board, any
RTIs and cross connection boards must first be mounted on the rear of the SLSC chassis. Both
components are optional and are not required to use the AL-1032 board.
Now that all optional components have been installed into the chassis, the board can be
inserted. Please refer to the specific SLSC Chassis Getting Started Guide and Specifications
from NI to understand how to Install and Remove SLSC boards safely.
In addition to the mentioned guide, the board should also align with the RTI on the rear of the
chassis. All pins should firmly connect to the corresponding position on the board without great
resistance or the pins/connectors being bent.
ALIARO reserve the right to vary from the description given in this data sheet and shall not be liable for any errors.
VeriStand application software helps you configure I/O channels, data
logging, stimulus generation, and host communication for NI real-time
hardware. If using VeriStand to control the AL-1032 Board, install the
ALIARO SLSC custom device from ALIARO's website. VeriStand can
be installed from NI's website.
xMove Configurator is a configuration tool used to quickly configure
test systems and test system components such as the AL-1032
Board. It achieves this by defining/editing VeriStand System definition
files. We recommend using xMove with either of these software
platforms for maximum efficiency. xMove can be download from NI's
website. Contact ALIARO for more information.
www.aliaro.com
Advertisement
Table of Contents
