Labino MB Poseiodon L111 Operating Instructions Manual page 7

Battery indicator:
Four colors indicates the status of the battery:
a. Green: over 75 % charged
b. Yellow: 50-75 % charged
c. Orange: 25-50 % charged
d. Red: 10-25 % charged
e. Red blinking: less than 10% charged
MB Poseidon can be used also while the batteries are charging. The LED indicator
shows than the staus of the charging (yellow or green).
Charging by connecting the Power Supply Unit to MB Poseidon:
1. Dry environment: Connect the external PSU in a dry location. Mind heat
dissipation of the PSU.
2. Connect the external Power Supply Unit to the connector in the back of the MB
Poseidon head.
3. Connect mains cable to mains outlet.
4. LED indicator: Shows yellow for charging and changes
to green when the batteries are fully charged.
Charging the batteries in the external battery charger:
1. Dismount batteries by unscrewing the lid on the
handle.
2. Remove batteries from slot.
3. Connect AC adapter to mains outlet.
4. Connect AC adapter circular DC jack to the charger
5. Observe battery polarity when inserting the batteries
into the charger. Misplacement of the batteries in the
charger can damage the charger.
6. Place battery in charging dock and make a gentle push.
7