Service And Operating Instructions - Labino MB Poseiodon L111 Operating Instructions Manual

6. SERVICE AND OPERATING INSTRUCTIONS

FUNCTIONAL DESCRIPTION
Standard versions:
• Position 1: Blue radiation – Press the switch to activate.
• Position 2: Off position – Press the switch a second time to deactivate the lamp.
MAINS OPERATED UNIT
• The external PSU may not be used for purposes/products other than those
prescribed by Labino.
• The external PSU is built for operation from mains (AC). During the
connecting and disconnecting procedure of the PSU, the lamp has to be shut-
off. After this procedure, the lamp can be operated as usual.
Mounting:
1. Dry environment: Connect the PSU in a dry location. Mind heat dissipation of
the PSU.
2. Connect: Connect mains cable to mains outlet.
3. Green light: When connected, the LED indicator lights green.
BATTERY OPERATED UNIT
• The Battery must not be used for purposes/products other than those
prescribed by Labino. Battery must not be charged with any charger not
supplied by Labino.
• Voltage: 3.6 V
• Capacity: 3 400 mAh
• Two batteries are required to operate the lamp.
Mounting:
1. Mount the batteries in the handle.
2. Open lid for battery slot by unscrewing the two screws holding the lid.
3. Batteries slides into slot. Mind polarity of batteries.
4. Mount lid by screwing it back on to handle.
6