Table of Contents
Advertisement
4. TRANSPORTATION OF THE EQUIPMENT
5. HANDLING OF THE EQUIPMENT / INTENDED USE
Although the lamp is very sturdy, in view of the extensive electronic equipment it
contains, it should nevertheless be treated with a certain amount of care.
The lamp can be switched on and off at any interval.
Waterproof
Tested waterproof classification "IP68 1.1 m, 31 min", means that the lamp can
withstand water from above without any harmful side-effects. It can be held up to
1.1 meter under water, for up to 31 minutes.
Cleaning – do not disassemble unit for cleaning
Exterior surfaces should be cleaned with a soft lint free cloth and mild detergent.
Isopropanol and a microfiber cloth shall be used to perform the cleaning of the
filters. Disassembly voids warranty.
Temperature
Make sure the unit has good ventilation. Do not mount the unit at a closed
compartment and do not cover any part of the unit. The unit is cooled by
convection to surrounding air, remove all obstacles for efficient convection.
Maximum ambient temperature is 40° C (104° F).
Intended use
Intended use of the equipment is to inspect an object by irradiating the surface
with blue light emitted from the light source (MB Poseidon). The light is specially
designed to perform Non Destructive Testing.
The user should always wear Yellow contrast goggles supplied with the
equipment.
Warning! Shipping of batteries:
Make sure you ship all products including lithium batteries
according to IATA Dangerous Goods Regulations (DGR). DO
NOT ship broken lithium batteries. Broken batteries shall be
disposed in accordance with local waste disposal regulations.
5
Advertisement
Table of Contents
