Security Settings; Security Code; Changing Your Security Code - Nokia 6162i Owner's Manual

Security settings

This menu includes the following security features:
4-3-1 Restrict calls - See page 56.
4-3-2 Access codes - See page 16.
The Access codes submenu includes Phone lock (page 52),
Unlocked phone number (page 70), Change lock code
(page 43), and Change security code (page 62).

Security code

Your phone will prompt you for a security code for
certain features. These features can be used only after
the correct security code has been successfully
entered.
Note: When entering your security code, ***** will appear on the
display to keep others from viewing your code.
If you make a mistake entering the code, erase the last
digit entered by pressing Clear, or press and hold Clear.
Then enter the correct code or press Back to exit the
current feature.
If you enter an incorrect security code (Code error will
appear) five times in a row, your phone won't accept
any entries for the next five minutes.
Your phone's default security code is 12345. It's highly
recommended that you change this code at once, write it
down, and store it in a safe place away from your phone.

Changing your security code

1. Press Menu 4 3 2 4 (Settings - Security settings -
Access codes - Change security code)
2. Enter security code and press OK
3. Enter new security code at Enter new security
code:, press OK
4. Enter new security code again at Verify new
security code:, press OK
5. Phone will display Security code changed
62