Station List; View Visual Content; Visual Radio Settings - Nokia 5500 User Manual

M u s i c

Station list

When the radio is on, select
The station list is used for managing the saved radio
stations. When you open the list, the currently active
station is highlighted if it is saved. Otherwise, the first
saved station is highlighted.
Select Options and from the following options:
Station > Listen — Listen to the selected station.
Station > Edit — View the settings of the highlighted
station. See "Station setup",
Station > Move — Move a station to another position in
the list.
Station > Delete — Delete the highlighted station from
the station list.
Station directory — Activate the station directory
(network service).
Station setup
Scroll to a station in the station list, press the scroll key,
and select Edit to change the following station
parameters:
Name — to edit the name of the station
Location — to edit the location of the radio station
Frequency — to edit the frequency of the station
Visual service ID — to edit the visual service ID
90
Copyright © 2007 Nokia. All rights reserved.
Options > Stations.
p. 90.
Enable visual service — to allow or deny the viewing of
visual content of the current radio station

View visual content

You can view visual content if the station is saved in the
station list and visual service is enabled for this station.
To check availability and costs, and to subscribe to the
service, contact your network operator or service provider.
To view visual content of the current station, scroll to
and press the scroll key.
If the visual service ID was not saved in the station list, you
are asked for the visual service ID. Enter the visual service
ID and select OK. If you do not have the visual service ID,
select Retrieve to access the station directory (network
service).
To end the visual content feed but not the FM radio, select
Close.
To set light settings and the power saver time-out, select
Options > Display settings.

Visual Radio settings

When the radio is on, select
following:
Start-up tone — to enable or disable the start-up tone
Options > Settings and the
,