Table of Contents
Advertisement
Radio
To turn on the radio, select
To turn the radio off, select Exit.
When you turn on the radio for the first time, a wizard
helps you to save local radio stations (network service).
For availability and costs of the visual service and station
directory services, contact your service provider.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may
damage your hearing. Do not hold the device
near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
The radio supports Radio Data System (RDS) functionality.
Radio stations supporting RDS may display information,
such as the name of the station. If activated in the
settings, RDS also attempts to scan for an alternative
frequency for the currently playing station, if the
reception is weak. To set your device automatically search
for alternative frequencies, select Options > Settings >
Alternative frequencies > Auto scan on.
57
> Applications > Radio.
Copyright © 2008 Nokia. All rights reserved.
Tune and save a radio station
To start the station search when the radio is on, scroll up
or down. To save the station when a station is found,
select Options > Save station. Select a location for the
station, enter the name for it, and select OK.
To view the list of saved stations, select Options >
Stations. To change the settings of a station, select the
station and Edit.
Radio functions
To adjust the volume, press the volume keys.
If there are any saved stations, scroll right or left to the
next or previous stations.
You can make or answer a call while listening to the radio.
The radio is muted when there is an active call.
To listen to the radio in the background and go to the
standby mode, select Options > Play in background.
View visual content
For availability and costs, and to subscribe to the service,
contact your service provider.
To view visual content of the current station, select
Options > Start visual service. Station needs to have visual
service ID saved before service can be used.
Advertisement
Chapters
Table of Contents
