Table of Contents
Advertisement
1. Remove the front intake grille.
Pull up the front intake grille about 90° and slide it slightly to the
left to unhook the tabs.
CAUTION
Do not raise the front intake grille any higher than 90° to the unit
or damage to the tabs may occur.
2. Remove the air filter.
Tilt up and pull out the Air Filter by the holder.
3. Remove the front grille.
A. At bottom right side of the front grille, press inward on the
cabinet near the power cord, and pull the grille outward to the
right until right tab releases.
B. At bottom left side, push inward on the cabinet and pull the
grille outward to the left to release the left tab. Do not pull the
bottom edge toward you more than 3 inches to prevent two top
tabs from damage.
C. Slide the front grille upwards to free the two top tabs from
slots at the top of the cabinet.
Advertisement
Table of Contents
