Table of Contents
Advertisement
Create a new connection (Windows XP)
1
Click Start, then click Control Panel.
2
Double-click Network Connections.
3
Click Create a new connection in the Network Tasks pane, then click Next to begin the New Connection Wizard.
4
Verify that the Connect to the Internet option is selected, then click Next.
5
Click the Set up my connection manually option, then click Next.
6
Click the Connect using a dial-up modem option, then click Next.
7
Select only your Nokia phone as the active modem, then click Next.
8
Type a name for your new connection (example: Internet-3G Packet Data), then click Next.
9
Enter the network access code (for example,
10
Enter the username and/or password as supplied by your wireless service provider (if required).
11
Cancel any of the options on the Internet Account Information that you don't want or need, then click Next.
12
Click Finish to complete the Wizard.
Connect to the packet data or QNC network
1
Establish a connection between your phone and PC.
2
Double-click the new connection (for example, Internet-3G Packet Data).
3
Supply user name or password (as needed), then click Connect
Your phone displays Creating packet data connection while establishing a connection. Once a successful connection has been
made, the
status indicator appears in the upper left corner of the phone's screen. Your Windows operating system displays
its normal series of authentication messages while the connection is being established.
• CONFIGURE AOL FOR PACKET DATA OR QNC
Note: The following instructions are based on America Online (AOL) version 6 software (or newer). For more information
on your AOL software, visit: http://www.aol.com.
You can use the packet data network to access your AOL account. However, instead of using the AOL dial-up number, you connect
using AOL's TCP/IP connection.
To configure AOL for TCP/IP access:
1
From the AOL Sign On screen, click SETUP.
2
Click Expert Setup, then click the Locations tab.
3
Click the Add Location button.
#777
) , then click Next.
.
[ 28 ]
Configure your data and fax software
10
Advertisement
Table of Contents
