Table of Contents
Advertisement
10 Configure your data and fax software
Before you can use your phone to send and receive digital data and fax calls, you must configure your data software so that it uses
your phone rather than your existing modem. You may consider creating a separate set of dialing properties to use when your phone
is connected to your computer, rather than changing any existing settings.
• USE MICROSOFT DIAL-UP NETWORKING FOR PACKET DATA (2G, 3G) AND QNC
You can use Microsoft's Dial-up Networking feature to connect to the Internet through your wireless service provider's access
point. However, instead of dialing a traditional phone number, the dialing string to access the packet data network or QNC network
is (for example):
#777
Check with your wireless service provider for the exact dialing string needed and for your username and password (if required).
Create a new connection (Windows 98/ME)
1
Double-click the My Computer icon, then double-click the Dial-up Networking folder.
Windows 2000 and Windows ME users: Click Start, point to Settings, then click Dial-up Networking.
2
Double-click the Make New Connection icon.
3
Type a name for your new connection (for example, Internet-3G Packet Data).
4
Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next.
5
Enter the packet data or QNC network access code (for example,
You may need to remove area code information so only the access code appears.
Create a new connection (Windows 2000)
1
Click Start, point to Settings, then click Network and Dial-up Connections.
2
Double-click Make New Connection, then click Next to begin the Network Connection Wizard.
3
Verify that Dial-up to private network is selected, then click Next.
4
Select only your Nokia phone as the active modem, then click Next.
5
Enter the network access code (for example,
6
Select the connection availability, then click Next.
7
Type a name for your new connection (for example, Internet-3G Packet Data), then click Finish.
Your new Dial-up Networking connection is now ready for use. You may need to update or remove information found in the User
name field prior to creating a 1XRTT connection.
#777
), then click Finish.
#777
), then click Next.
[ 27 ]
Configure your data and fax software
10
Advertisement
Table of Contents
