Table of Contents
Advertisement
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a command
by speaking the voice tag. There are two ways to activate a voice command:
1
With the optional headset attached, press and hold the headset button.
OR
At the start screen, select and hold Contacts.
2
When Please speak now appears, pronounce the voice tag clearly into
the microphone.
Work with a voice command tag
You can play back, change, or delete an existing voice command tag.
1
From the menus, select Voice > Voice commands and the desired tag.
2
Select Options and one of the following:
Playback—Listen to the tag.
Change—Change the tag. Select Start and speak the new tag clearly into
the microphone.
Delete—Delete the tag.
• SEND YOUR OWN NUMBER IN CALLER ID
With each call you place, you can determine whether your telephone number
appears on the caller ID of another phone.
In most service areas, when you call others, your name is presented to their caller
ID (if they subscribe). With Send own caller ID, you can block or send the display
of your number when you make a call.
Note: Send own caller ID when calling might not be available in your
wireless system. Contact your service provider for details and availability.
Also note that this feature is effective only when you call a number that is
equipped with caller ID.
Before you can use Send own caller ID when calling, you must first store its
feature code. Otherwise, this feature might not appear on the phone menu.
Store the feature code
1
From the menus, select Settings > Network services > Network feature setting.
2
At the Feature code prompt, enter the feature code from your service provider
and select OK > Send own caller ID when calling > Yes.
Nokia 3520 and Nokia 3560 User Guide
31
Advanced calling features
Copyright © 2004 Nokia
Advertisement
Table of Contents
