Calling Card - Nokia 3520 User Manual

Before you can use the automatic redial feature, you must activate it.
From the menus, select Settings > Call settings > Automatic redial > On.

• CALLING CARD

You can use a calling card when you dial long distance calls. First you must store
your calling card information in the phone. Your phone can store information for a
maximum of four calling cards.
Save calling card information
PART 1
1 From the menus, select Settings > Call settings > Calling card.
2 At the prompt, enter your security code and select OK.
3 Scroll to Card A, Card B, Card C, or Card D and select Options > Edit >
Dialing sequence and one of the following:
Access no. + phone no. + card no.—For cards that require you to dial the
1-800 access number followed by the phone number followed by the card
number (and PIN if required).
Access no. + card no. + phone no.—For cards that require you to dial the
1-800 access number followed by the card number (and PIN, if required)
followed by the phone number.
Prefix + phone no. + card no.—For cards that require you to dial the prefix
(any numbers that must precede the phone number) followed by the phone
number you want to dial followed by the card number (and PIN, if required).
PART 2
The order of the following steps may vary, depending on which dialing sequence
your card uses.
4 When prompted for the access number of the calling card, enter the number
and select OK.
This number is usually the 1-800 number that is listed on the calling card.
5 When prompted to enter a calling card number (usually shown on the front of
the calling card), enter the number (and PIN, if required) and select OK.
6 At the Save changes? prompt, select OK.
Choose a calling card
If you have more than one calling card, you must choose one before making a call.
1 From the menus, select Settings > Call settings > Calling card.
2 Enter your security code and select OK.
3 Scroll to the desired card and select Options > Select.
The message Card ready for use appears.
26 Copyright © 2004 Nokia