Automatic Update Of Service; Calling Card; Save Information - Nokia 6265i Manual

S e t t i n g s
In the standby mode, select Menu
On or Off.
End call when slide closed
Set your phone to end a call when you close the slide. If the setting is off, you
must press the call key after you close the slide.
In the standby mode, select Menu
closed > On or Off.

Automatic update of service

Set your phone to automatically receive updated from your netwok that may
improve service and coverage.
In the standby mode, select Menu
service > On or Off.

Calling card

If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.

Save information

1. In the standby mode, select
2. Enter your security code, and select OK. (See "Security," p. 95.)
3. Scroll to one of the four memory locations, and select
Dialing sequence .
4. Select one of the following sequence types:
Access + phone + card—Dial the access number, the phone number, the card
number and PIN, if required.
Access + card + phone—Dial the access number, the card number and PIN, if
required, then phone number.
Prefix+ phone + card—Dial the prefix (numbers that must precede the phone
number) and phone number you want to dial, then card number and PIN, if
required.
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
80
FCC DRAFT ONLY
> Settings > Call > Answ. when slide opened
> Settings > Call > End call when slide
> Settings > Call > Automatic update of
Menu > Settings > Call > Calling
Options
>
card.
> Edit > OK >