Use Call Waiting; Send Own Caller Id When Calling - Nokia 2280 User Manual

1
Press Menu 4-6-2 (Settings
Network services
2
Scroll to the desired call divert
option, then press Select.
3
Highlight Activate
4
Enter the number to which you want
your calls diverted (or press
to recall a number from the phone
book), and press OK.
Your phone calls the network to
activate (or cancel) the feature you
have requested. The network sends a
confirmation note when the feature
has been activated (or cancelled)
successfully.

• USE CALL WAITING

This network service lets you receive an
incoming call when you are already in a
call. When you receive an incoming call,
your phone displays the caller's phone
number (or the caller's entry in your
phone book). The phone also beeps,
notifying you of the incoming call.
Answering a waiting call
Press the Send key (or press Answer) to
place the current active call on hold
automatically and answer the new call.
Switch between the two calls
Accepting the waiting call puts your first
caller on hold. To put the second caller on
hold and reconnect with the first caller,
press the Send key.
End the active call
To end the active call, simply allow the
other party to hang up; the call on hold
then becomes the active call.
>
> Call divert).
and press Select.
Search
Copyright © 2004 Nokia. All rights reserved.
OR
1
Press the End key to terminate the
active call.
2
The network redials your phone with
the call on hold.
Answer this as you would any
normal incoming call.
3
Three-way Calling
Please contact Reliance for details
about this feature.
• SEND OWN CALLER ID
WHEN CALLING
This feature allows you to block caller ID
when you call someone (your number will
not be displayed on their caller ID). This
feature may only be effective when
calling a number equipped with caller ID.
Note: This feature is available
only when supported by the
wireless network.
Important: This feature works on
a call-by-call basis. You must
enable this feature each time
you want to block the sending of
your own number to the
recipient's caller ID.
Store the feature codes
Before you can use the
ID when calling feature, you must store
the feature codes for activating this
feature. Once the code is stored in your
phone, it is sent automatically to the
network when you select this option
from your phone's menu.
Advanced features
Send own caller
55