Huawei OptiXstar EG8245X6-8N Quick Start Manual page 9

Huawei OptiXstar EG8245X6-8N
Quick Start
Indicator
PON/LOS
LAN1-
LAN4
TEL1-
TEL2
USB
WLAN
WPS
Status
No.
1
2
3
Issue 01 (2021-04-07)
Status Description
Off The power supply is cut off.
See the following table.
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
Off The Ethernet connection is not set up.
Steady on The ONT is registered with the softswitch but no
service flows are transmitted.
Blinks twice a The ONT is registered with the softswitch, and
second data is being transmitted on the port.
Blinks once The ONT fails to be registered with the softswitch.
every 2
seconds
Off The POTS port is disabled.
Steady on The USB port is connected and working in the
host mode, but no data is transmitted.
Blinking Data is being transmitted on the USB port.
Off The system is not powered on or the USB port is
not connected.
Steady on The WLAN function is enabled.
Blinking Data is being transmitted over the WLAN port.
Off The WLAN function is disabled.
Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
Off The WPS function is disabled.
PON Status LOS Status
Off Off
Blinks twice Blinks twice
a second a second
Blinks twice Off
a second
Copyright © Huawei Technologies Co., Ltd.
Description
The ONT is prohibited by the upper-layer
device or blinks abnormally. Contact the
service provider for help.
The ONT attempts to set up a connection
with its upper-layer device.
3 Indicator Description
6