Huawei OptiXstar EG8245X6-8N Quick Start Manual page 7

Huawei OptiXstar EG8245X6-8N
Quick Start
No.
1
2
3
4
5
6
7
8
9
Issue 01 (2021-04-07)
Item Description
Reset Press the button for a short time to reset the device, or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may
fail to access the Internet. If an ONT cannot access the
Internet after a reset, contact your Internet service provider.
TEL1-TEL2 Connects to the ports on a telephone or fax machine.
LAN1-LAN4 Connects to PCs or IP set-top boxes (STBs).
USB Connects to USB storage devices.
On/Off Powers the ONT on or off.
Power Connects to a power adapter.
Optical port The optical port is equipped with a rubber plug and
connected to a fiber for upstream transmission.
The type of the optical connector connected to the
optical port can be SC/APC.
WPS When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
WLAN Used to enable or disable the WLAN function
● When the WLAN is off, press the WLAN button (>
3s) and release the button to open the WLAN.
● When the WLAN is on, press the WLAN button (>
3s) and release the button to close the WLAN.
Copyright © Huawei Technologies Co., Ltd.
2 Connecting Cables
4