Countdown Timer; Stopwatch; Uim Services - Nokia 2255 User Manual

Countdown timer

Timer accuracy is not the same as that
of a professional instrument.
Therefore, Nokia advises against its use
for official competitions or any other
event in which a high-precision device
would be required to establish exact
times.
The countdown timer provides general
measurements for personal use that
may vary from scientific
measurements.
You can set an alarm to sound after a
period of lapsed time.
1. Select Menu > Extras
Countd. tim.
2. Enter the countdown time
(hh:mm), and select OK.
3. Enter a note for the countdown,
if desired, and select OK.
While the timer is running, you can
select Menu > Extras
tim. > Change time
When the timer is running,
shown in standby mode. When the
alarm time is reached, a tone sounds,
the display flashes, and the alarm note
appears. Press any key to stop the
alarm or select Restart
timer again for the same countdown
time.
Copyright © 2005 Nokia. All rights reserved.
The stopwatch can be used for time
measurement, such as in sports.
Using the stopwatch or allowing it to
run in the background when using
other features increases demand on
battery power and reduces battery life.
1. Select
2. Select
3. When the timing is stopped,
>
> Countd.
or Stop timer.
is
This menu appears only if
your UIM card provides
additional services. The name and
contents of this menu depend on the
services available.
to start the
For availability, rates, and information
on using UIM services, contact your
UIM card vendor or network operator.

Stopwatch

Menu > Extras
> Start to start timing.
Stop to stop timing.
select Options > Start, Reset,
or Exit.
If you select Start, timing
continues from the previous stop
time. Reset stops the current
timing and sets the time to zero.
To set the timing to continue in the
background, select Back. While the
time is running,
standby mode.

UIM services

E x t r a s
> Stopwatch
flashes in
33