Call Summary; Phone Settings; Phone Language; Automatic Keyguard - Nokia 2116 User Manual

Data calls only—The device
receives only data calls.
Fax calls only—The device
receives only fax calls.
2. When you are finished receiving
the fax or data call, repeat Steps
1 and 2 and select Normal.
Data transfer
To view the transmission speed
when sending or receiving data or
fax calls, in standby mode, select
Menu > Settings >
Data/fax calls > Data rate display
Graphic or Off.

Call Summary

Your device can display the time
spent on a call when you hang up.
In the standby mode, select
Settings > Call settings
summary > On or Off.

■ Phone settings

Phone language

1. In the standby mode, select
> Settings > Phone settings
Phone language.
2. Select the language of your
choice.
Call settings >
>
Menu >
> Call
Menu
>
Copyright © 2005 Nokia. All rights reserved.
The language setting may affect the
time and date formats of the clock,
alarm clock, and calendar.

Automatic keyguard

You can set the keypad of your
device to lock automatically after a
preset time delay.
1. In the standby mode, select
> Settings > Phone settings
Automatic keyguard
2. If you select On,
displayed.
3. Enter the delay time (in minutes
and seconds), and select OK.
When keyguard is on, it may be
possible to dial the emergency
number programmed into your
device.

DTMF tones

DTMF tones are the tones that sound
when you press the keys on your
device keypad. You can use DTMF
tones for many automated dial-up
services such as banking and airlines
or for entering your voice mailbox
number and password.
DTMF tones are sent during an active
call. You can send them manually
from your device keypad, or send
them automatically by saving them
in your device.
S e t t i n g s
Menu
>
> On or Off.
Set delay: is
51