Nokia 2116 User Manual page 41

Voice mailbox number and
process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your step-by-step
interaction with the recorded
prompts. Remember that each
voice mail service varies. Your
steps may resemble the
following:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234 and *.
Be precise; you need this
information to set up your voice
mail with dialling codes.
Dialling codes
Press * repeatedly to cycle through
dialling codes. When the desired
code appears in the display, pause
briefly and the code is inserted into
the dialling string.
The following dialling codes are
available:
Dialling Indicates...
code
* Bypasses a set of
instructions.
Copyright © 2005 Nokia. All rights reserved.
Dialling Indicates...
code
+ Causes the International
access code to be replaced
by +. This is a carrier-
dependent feature.
p Pauses for 2.5 seconds
before sending any
numbers that follow.
w Waits for you to press the
call key before sending the
numbers or codes that
follow.
Set up voice mail with dialling
codes
1. In the standby mode, select
Contacts > Speed
2. Scroll to an empty speed dialling
slot, and select Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes, and enter
codes as necessary using the
information that you saved from
"Voice mailbox number and
process", page 41.
For example, if you pause for
5 seconds after connecting to
voice mail, enter p twice after the
voice mailbox number (for
example, 2145551212pp).
M e s s a g e s
dials.
41