Automatic Redial; Summary After Call; Send My Caller Identity - Nokia 7270 Quick Manual

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast
busy signal when you dial. With automatic redial activated, your phone redials
the number up to 10 times, and notifies you once the network is available.
Select Menu > Settings > Call settings > Automatic redial > On or Off.
1 touch dialing
-
You can turn the 1-touch dialing feature on and off. For more information, see
"1-touch dialing" on page 44.
Select Menu > Settings > Call settings > 1-touch dialing > On or Off.
Call waiting
If supported by your service provider, call waiting notifies you of an incoming
call even while you are in a call. You can accept, reject, or ignore the incoming
call.
ACTIVATE OR DEACTIVATE
Select Menu > Settings > Call settings > Call waiting > Activate or Cancel.
CHECK STATUS
You can see whether call waiting is active, and for which type of calls.
Select Menu > Settings > Call settings > Call waiting > Check status.
USE CALL WAITING
1 During a call, press Call to answer the waiting call.
The first call is put on hold.
2 Press End to end the active call.

Summary after call

You can display the time spent on a call when you hang up (network service).
Select Menu > Settings > Call settings > Summary after call > On or Off.

Send my caller identity

You can prevent your number from being displayed on the receiving party's
caller ID. This feature is a network service and works on a call-by-call basis.
Contact your service provider for more information.
Select Menu > Settings > Call settings > Send my caller ID > Set by network,
Yes, or No.
56 Copyright © 2004 Nokia