Kohler K-12185 Installation Manual page 4

Escutcheon
Sink
Spout
Hose
Washer
3. Install the Remote Valve
NOTE: The remote valve must be located within 8" (20.3 cm) of the
spout.
Slide the escutcheon and gasket over the supply hoses and onto
the remote valve.
Position the remote valve in the desired location.
Assemble the bracket, washer, and nut to the stud from
underneath the sink.
Align the handle and securely tighten the nut.
Connect the inlet hose to the spout connection. Make sure the
O-ring (not shown) in the spout connection is in place.
1036180-2-C
Spout Connection
Gasket
Remote
Valve
Stud
Spacer
Bracket
Nut
4 Kohler Co.