How To Use - ECO-WORTHY 5A User Manual

HOW TO USE:

1.STANDARD MODE
A.C Power is connected with the wall socket
properly,Press "MODE"key,The LCD signal
will show "STD",the charger is switched to
standard battery mode(GEL,VRLA,SLA),cor-
rectly connect the charger output leads
(Red"+",Black"-")to
negative
3.LI MODE
A.C Power is connected with the wall socket
properly,Press "MODE"key,The LCD signal
will show "LI",the charger is switched to
LiFePO4 battery mode(LiFePO4),correctly
connect the charger
(Red"+",Black"-")to
negative
5.LOW TEMPERATURE CHARGINGMODE
When the ambient temperature is below -10
degrees, Press "MODE"Key, The LCD signal
will show" "this mode can be set for battery
charging to facilitate the rapid recovery of the
battery capacity. NOTED:ONLY FOR 12V
LEAD ACID BATTERIS(Standard,AGM)
battery positive and
output leads
battery positive and
2.AGM MODE
A.C Power is connected with the wall socket
properly,Press "MODE"key,The LCD signal
will show "AGM",the charger is switched to
AGM battery mode(AGM),correctly connect
the charger output leads (Red"+",Black"-")to
battery positive and negative
4.DC ADAPTER MODE
A.C Power is connected with the wall socket
properly,Press "MODE"key and hold for 3-5
seconds ,The LCD signal will show "DC",the
charger is switched to DC Adapter with 12V
10Amp (MAX output 120 Watt)
6.BATTERY TESTER MODE
The charger can be used for testing your
battery healthy.Correctly connect your battery
positive and negative with the charger leads,
no need to connect AC power.
The LCD display will indicate battery indicator
20-100%,"BAT LOW" will be indicated while
the battery voltage is LOW,easily to know
your battery status.
- 9 -