Error Codes - Samsung CP1370 User Manual

Hide thumbs Also See for CP1370:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 241
Electronic interference causes display to be reset.
• Disconnect the power plug and reconnect it. Reset the time.
Condensation appears inside the oven.
• This is a normal occurrence. Simply wipe away after cooking.
The fan continues to operate after the oven has been turned off.
• This is a normal occurrence. Cooling fan may continue to operate for up to
three minutes after oven has been turned off.
Air flow is detected around the door and outer casing.
• This is a normal occurrence.
Light reflection around the door and outer casing.
• This is a normal occurrence.
Steam escapes from around the door or vents.
• This is a normal occurrence.
A clicking sound occurs while the oven is operating, especially
in defrosting mode.
• This is a normal occurrence.

ERROR CODES

Error Code
58_troubleshooting and error code
CP1370-B_XEO_DE68-04022D_EN.indb 58
General Functions
TEMP SENSOR OPEN
In case the value of the temperature sensor is more than 250
°C during operation / cancellation.
TEMP SENSOR SHORT
In case the value of the temperature sensor is less than 5 °C
during operation / cancellation.
OVER 230 °C DURING OPERATION OF MWO MODE
In case the temperature rises over 230 °C during operation of
mwo mode (fire sensed).
DAMPER S/W
In case it fails to sense the DAMPER to open or close for 1
minutes.
2012-08-16
3:48:22

Advertisement

Table of Contents
loading

Table of Contents