D&R ELECTRONICS Ford F-150 K9 Kennel Instruction Manual page 6

Step 6
Sliding Door To Front Panel
The front sliding door comes assembled with slides and latch. Line up the holes in the
front panel with the studs on the slides and secure using 1/4-20 Nylock nuts. Ensure
proper slide movement and latch functioning.
Step 7
Front Panel to Floor Panel, Sub-frame & Roof Panel
Place Front Panel on Sub-frame and secure using 1/4-20-3/4" Round Head Bolt. Also,
secure Front Panel to Floor Panel and Roof Panel using 1/4-20-3/4" Button head
screw, 1/4" Lock Washer and 1/4" Flat Washer.
6