Advertisement
VEHICLE PREPARATION
Remove the 2 rear seats and set aside. Some Plastic floor panels may require remov-
al as well. The removed seat bolts will be used to fasten the sub-frame to the floor.
Remove Passenger and Driver Side Rear door panels and set aside. The Door Locks
may require disassembly in order to tuck away door lock rods.
Contact D&R if you are unsure how to remove the Seats or Door Panels.
INSTALLATION OF K9 UNIT
Step 1
Sub-frame into Vehicle
Place sub-frame over the seat mount holes and studs. Center the sub-frame & se-
cure using all factory seat bolts and nuts.
3
Advertisement
