Advertisement
Portofino Installation Guide
Cut the wall profiles to length using a Junior hacksaw
13
and then file the cut ends smooth.
Run a bead of silicone along the wall side of the wall
profiles and screw them tightly in place.
Loosely screw the Glass to Wall brackets to the wall.
Using suction glass lifters, replace the glass Return
15
panel and In Line panel into the silicone lined channels.
To prevent leakage around the wall brackets, fill the
glass slots with silicone as shown.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road,
Dunmow, CM6 1XJ
Check that the rubber strips are correctly positioned.
14
Run beads of silicone along the inside of both vertical
wall profiles as shown, and the underframe channels
where the Return panel and In Line panel will sit.
Do not apply silicone to the underframe where the
Insert will be fitted under the door. Place a generous
amount of silicone into the bottom corners where the
vertical profiles and underframe channels meet.
Loosely fix the face plates of the glass to wall brackets
16
through the slots in the glass, ensuring that the clear
gaskets are inserted on both sides of the panel. Fully
tighten the wall screws.
Ensure the Return panels are plumb vertical and in the
correct position in the underframe, then fully tighten
the glass to wall bracket face plates.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com
www.majesticshowers.com
Page 8
Advertisement
