Related Manuals for Olimpia splendid Caldostile F
Summary of Contents for Olimpia splendid Caldostile F
- Page 1 Caldostile F INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED SPACES OR OCCASIONAL USE...
- Page 2 SAFETY Read the Installation and User Guide(*), especially the safety instructions below. WARNING - Certain parts of this product Caution, may become very hot and may cause hot surface burns. Pay extra attention to small children and vulnerable people when they are around the heater.
-
Page 3: General Information
GENERAL INFORMATION We wish to thank you for purchasing a heater produced by our company. This document is restricted in use to the terms of the law and may not be copied or transferred to third parties without the express authorisation of the manufacturer. Our heaters are subject to change and some parts may appear different from the ones shown here, without this affecting the text of the manual in any way. - Page 4 5. Do not place appliance close to a radiant heat source. 6. Do not operate in areas where gasoline, paint or other flammable liquids are used or stored. 7. This appliance heats up when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Page 5 28. Always unplug appliance when not in use. 29. Do not allow cord to come in contact with heated surfaces during operation. 30. Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from areas where it is likely to be tripped over. 31.
-
Page 6: Operation
OVERVIEW OPERATION 1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in your area matches that on the rating label on the unit. 2. When plugged in, turn on the Main power switch at the rear of the unit. 3. -
Page 7: Tip-Over Protection
e) OSC: Press to activate oscillation. Press again to cancel. f) While using, press ‘+’& ‘-‘ to control the temperature. When the room temperature rises to the set temperature, the heater will stop heating. When room temperature drops below set temperature, the heat will turn on again. g) Regulate the temperature by pressing ‘+’... -
Page 8: Thermal Cut-Off
THERMAL CUT-OFF This heater is protected with thermal cut-off protection that switches off the appliance automatically in case of severe overheating. In this case, unplug the appliance, wait about 30 minutes for it to cool and remove any possible cause of overheating, eg. something covering the heater.