Component Names And Functions; Rear Panel - Yamaha AG08 User Manual

Component names and functions > Rear panel

Component names and functions

Rear panel

Bottom part of rear panel
a
[12V] DC jack
Connect the included AC adapter here.
b
[POWER SOURCE] selector switch
Selects which jack is used to power this product. Set this to the [USB 2.0] side when powering this product via the
[USB 2.0] port, and set this to the [12V] DC jack side when powering this product via the [12V] DC jack.
c
[USB 2.0] jack (Type C)
Connect your computer or iPad/iPhone. When connecting a computer, power will be supplied from the computer to
this unit. When connecting an iPad/iPhone, connect the included AC adapter separately to the [12V] DC jack.
NOTE
A dedicated driver is required to use this product with a computer. Download and install the driver from the following website.
https://www.yamaha.com/2/ag08/
(
NOTICE
Do not connect any other devices to the USB 2.0 port except for a computer, iPad or iPhone.
(
A 5 V and 1.5 A power supply is required to operate this product on bus power. If a sufficient amount of power is not available
(
for a stable power supply, supply power separately via the [12V] DC jack.
a b c
11
d