Related Manuals for CleanCraft VCA Series
Summary of Contents for CleanCraft VCA Series
- Page 1 Operating Instructions Special Vacuum Cleaner flexCAT 141 VCA flexCAT 262 VCA flexCAT 141 VCA flexCAT 262 VCA...
-
Page 2: Table Of Contents
Dr.-Robert-Pfleger-Str. 26 D-96103 Hallstadt 4 Technical Data ............8 4.1 Type plate ............8 Fax: 0049 (0) 951 96555 - 55 E-Mail: info@cleancraft.de 5 Transport, packaging, storage.......8 Internet: www.cleancraft.de 5.1 Transport ............8 5.2 Packaging ............8 5.3 Storage ............... 8 6 Description of device ..........9... -
Page 3: Introduction
1.3 Limitation of liability You have made a good choice by purchasing the All information and notes in these operating instructions CLEANCRAFT special vacuum cleaner. were summarised while taking applicable standards and rules, the state-of-the-art technology and our long-term Read the operating manual thoroughly before com- knowledge and experiences into consideration. -
Page 4: Obligations Of The Operating Company
Safety Obligations of the operating company: WARNING! If the vacuum cleaner is used for commercial purposes, This combination of symbol and signal words indi- the operating company of the vacuum cleaner must com- cates a potentially dangerous situation which may ply with the legal working safety regulations. -
Page 5: Requirements To Staff
Safety 2.3 Requirements to staff 2.4 Personal protective equipment The personal protective equipment serves to protect per- The different tasks described in this manual represent sons against impairments of safety and health while wor- different requirements to the qualification of the persons king. - Page 6 Safety - Do not pull on the mains lead to pull the plug out of the socket. Protect the cable from heat, oil and ATTENTION! sharp edges. - Do not ever pull or lift the apparatus through the Store the device under consideration of its weight, i.e. electrical cable.
-
Page 7: Safety Labels On The Special Vacuum Cleaner
Intended Use 2.6 Safety labels on the special vacuum cle- 3.1 Unintended use aner WARNING! The following safety labels and instructions are attached Dangers in case of unintended use! to the vacuum cleaner (Fig. 1) and must be observed. Unintended use of the vacuum cleaner can cause hazardous situations. -
Page 8: Technical Data
Technical Data Technical Data Transport, packaging, storage 5.1 Transport flexCAT 141 VCA 262 VCA Check the special vacuum cleaner after delivery for vi- Length 395 mm 550 mm sible transport damage. If you discover damage to the vacuum cleaner, immediately report it to the transport Width / Depth 385 mm 600 mm... -
Page 9: Description Of Device
Description of device Description of device 1 Handgrip 2 Handle 3 ON/OFF switch Motor 1 flexCAT 141 VCA 4 Fastening clamps 5 Handle 6 Castors 7 Tank 8 Intake socket 9 ON/OFF switch Motor 2 6.1 Scope of device Fig. 5: Scope of device The Special Vacuum Cleaner is delivered with: - High temperature pre-filter - HEPA cartridge filter... -
Page 10: Operation
Operation - Cartridge filter HEPA H13 ATTENTION! Item number: 7013321 - Metal hose Ø38 mm / 2.8 m flexible Item number: 7013330 Always disconnect the power plug from the socket before handling the disconnected vacuum cleaner. - Suction tube extension Ø 38 / 1500 mm, with heat Always check the supply cable for damage such as protection cracks or signs of aging. -
Page 11: Start And Stop
PCare, maintenance and repair 7.4 Seal control Over time, it is possible that the seals will partially lose their function. This leads to a decrease in the suction po- wer. We recommend periodically checking the locking hooks, flexible suction hoses and seals for proper func- tion. -
Page 12: Cleaning The Filter
If you can not solve the problem with your vacuum cleaner yourself, then please contact your nearest 9.1 Decommissioning Cleancraft dealer. Please write down the following in- formation from the vacuum cleaner or the operating Immediately decommission disused machines in order to... -
Page 13: Spare Parts
Spare parts Spare part orders which do not include the above indi- Fault Possible Cause Solution cations may not be taken into consideration. If the indi- cations regarding the mode of dispatch are missing, the Device 1. Power plug is 1. -
Page 14: Spare Parts Drawings Flexcat 141 Vca
Spare parts Spare parts drawing 2: Filter unit 11.2 Spare parts drawings flexCAT 141 VCA In case of service, the following drawings shall help to identify the necessary spare parts. If necessary, send a copy of the parts drawing with the marked components to your authorised dealer. -
Page 15: Spare Parts Drawings Flexcat 262 Vca
Spare parts Spare parts drawing 4: Tank 11.3 Spare parts drawings flexCAT 262 In case of service, the following drawings shall help to identify the necessary spare parts. If necessary, send a copy of the parts drawing with the marked components to your authorised dealer. - Page 16 Spare parts Spare parts drawing 2: Filter unit Spare parts drawing 3: Tank Fig. 16: Spare parts drawings 2 and 3 flexCAT 141 VCA VCA - Series | Version 1.04...
- Page 17 Spare parts Spare parts drawing 5: Chassis Spare parts drawing 6: Filter block disc Spare parts drawing 7: Sealing ring Fig. 17: Spare parts drawings 5,6 and 7 VCA - Series | Version 1.04...
-
Page 18: Ec Declaration Of Conformity
According to Machinery Directive 2006/42/EC, Annex II 1.A Manufacturer / distributor: Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26 D-96103 Hallstadt hereby declares that the following product Product group: Cleancraft® Cleaning technology Machine type: Special Vacuum Cleaner Designation of the device*: flexCAT 161 VCA Item number *: 7003160... -
Page 19: Notes
Notes 13 Notes VCA - Series | Version 1.04... - Page 20 www.cleancraft.de...
Need help?
Do you have a question about the VCA Series and is the answer not in the manual?
Questions and answers