Control Panel And Indicator Lights - Freezimer DIM-30A Instruction Manual

CONTROL PANEL AND INDICATOR LIGHTS

Press the button to turn on your ice maker. Once on, a blue LED ring will light up and the
unit will begin to make ice. Press the button again to stop making ice and enter standby mode.
Press and hold the button for more than 3S in the standby state, and the machine will
enter the cleaning mode. If you want to stop the cleaning in the middle of the process, please
press and hold the button again for 3 seconds, and the machine will return to the standby
mode.
Press "TAKE ICE" button and hold on during any mode, the light will flicker and ice will come
out after 2 seconds.
The indicator light turns red when the water reservoir does not have sufficient water.
ADD WATER
The indicator light turns red when the ice basket is full.
ICE FULL
2.CONTROLS / INDICATOR LIGHTS:
● 1.Standby Mode: When the ice maker is powered on, both LEDs light up and you will hear
a beep sound. The ON/OFF button lights up in red and the ice outlet button lights up in blue,
and the machine is in standby mode at this time.
● 2. ON/OFF button: Press the button once in standby mode to turn on the ice making
process. Once turned on, the blue LED ring will light up and the unit will start making ice. To
stop ice making, press the power button again, the red LED ring will illuminate and the ice
maker will return to standby mode.
● 3.Cleaning: In standby mode, press and hold the ON/OFF button for more than 3 seconds,
and the machine will start and enter the cleaning mode (the ON/OFF indicator blinks in red
and blue light alternately), after the cleaning is over, the machine enters the shutdown
standby mode. If you want to stop the cleaning mode in the middle, please press and hold
the ON/OFF button again for 3 seconds, and the machine will return to the standby mode.
www.freezimer.com 9