BaByliss AS970E - B73b - Big Hair Luxe Manual

BaByliss AS970E - B73b - Big Hair Luxe Manual

Advertisement

BaByliss AS970E - B73b - Big Hair Luxe Manual

HOW TO USE

  • Ensure the hair is 80% dry and combed through to remove any tangles. Create your parting and divide the hair into sections ready for styling.
  • Secure the selected brush attachment onto the airstyler.
  • Slide the switch to the 'I' or 'II' position to turn the appliance on and select a heat setting suitable for your hair type.
  • After use, slide the switch to the '0' setting to switch off and unplug the appliance.
  • Allow the appliance to cool before storing away.

Rotating 50mm Soft Bristle Brush Attachment

  • To make the brush head rotate, press and hold the buttons marked << and >>, this will make the brush head rotate clockwise and anti-clockwise.
  • Place the styler at the roots and move the styler down through the hair.
  • Start to rotate the brush away from your head by pressing and holding the appropriate rotation button.
  • As you do this, resist the rotation of the brush by pulling the brush downwards. This will create tension through the section of hair.


It may take several attempts to perfect this technique, if the brush spins too quickly simply release the rotation button and remove from the hair.

  • As you reach the ends of the hair section, continue rotating the brush to roll the ends under.
  • Repeat for each section of hair.

38mm Firm Bristle Brush Attachment

  • Place the brush head under a section of hair, as close to the roots as possible.
  • Use the brush to lift the hair at the roots as you style.
  • Move the styler down the section, towards the ends of the hair.
  • Repeat for each section of hair.

Straightening Attachment

  • Place the straightening attachment under a section of hair, as close to the roots as possible with the straightening comb pointing away from your head.
  • Use your other hand to pull the hair section taut against the brush head until the straightening combs penetrate through the hair.
  • Gently glide the straightening brush through the section of hair, until you reach the ends.
  • Repeat for each hair section.

Smoothing Paddle Brush Attachment

  • Place the brush head under a section of hair, as close to the roots as possible with the bristles pointing away from your head.
  • Use your other hand to pull the hair section taut against the brush head until the bristles penetrate through the hair.
  • Gently glide the brush through the section of hair. As the brush head nears the end of the section, turn the brush head under to give shape at the ends of the hair.
  • Repeat for each hair section.

Heat Settings

There are 2 heat settings plus a cool setting. Slide the switch to the first position to select the cool setting '*', the second position for the low heat 'I', and the third position for the high heat 'II'.
Please note: If you have delicate, fine, bleached or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings.

Changing the Attachments

  • To attach a brush head, place it over the body of the appliance and slide it down into position.
  • Lock the brush head in place by sliding the switch on top of the brush to the locked position.
  • To remove a brush head, ensure the switch on top of the brush head is in the open position.
  • Gently slide the brush head up and off the unit to remove.

CLEANING & MAINTENANCE

To help keep your appliance in the best possible condition, please follow the steps below:

General

  • Ensure the appliance is switched off, unplugged and cool. To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
  • Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
  • Do not use the appliance at a stretch from the power point.
  • Always unplug after use.

Cleaning the Filter

  • Ensure the appliance is switched off, unplugged and cool.
  • Holding the handle of the appliance firmly, lift the filter open from the grooves close to the cord bushing, this will enable the rear filter to open.
  • Using a soft brush, clean any hair and other debris from the filter.
  • Replace the rear filter by closing the lid shut.

BABYLISS SARL
99 avenue Aristide Briand
92120 Montrouge
France
www.babyliss.com

Videos

My Babyliss Big Hair Care Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BaByliss AS970E - B73b - Big Hair Luxe Manual

Advertisement

Need Assistance?

Do you have a question about the AS970E-B73b that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents