Table of Contents
Advertisement
4.3.11 End Time Adjustment
The End Time Adjustment function allows you to set the end time of the programme up to 19 hours. You can increase
this time by 1-hour intervals.
C
INFORMATION
• Please do not use liquid detergent if you have selected the End Time Adjustment
function. Stains might remain on the clothes.
1. Open the loading door, place the laundry and add detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Press the End Time Adjustment button and select the desired time.
4. Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown will start for delayed
end. On the display, "_" will move up and down next to the delayed end time.
C
INFORMATION
• If the programme has not started, you can add laundry into the machine during the
delayed end time.
5. At the end of the countdown, duration of the selected programme will be displayed. "_" will disappear and
the selected programme will start.
Changing the delayed end time
If you want to change the time during countdown: Turn the programme selection knob to cancel the delayed end time
function, and then set the desired time again.
1. Press the End Time Adjustment button. When pressed for the first time, the programme duration will be rounded
up to the closest whole number time. Each following press will increase the time by an hour.
2. If you want to decrease the delayed end time, press the End Time Adjustment button consecutively until the desired
time is displayed.
Cancelling the delayed end function
If you want to cancel the delayed end time countdown and start the programme immediately:
1. Set the Programme Selection knob to any programme. This way, the Delayed End time will be cancelled.
The End/Cancel light will flash continuously.
2. Then, select the programme you want to run again.
3. Press Start/Pause button to start the programme.
4.3.12 Starting the programme
1. Press Start/Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
INFORMATION
• If no programme is started or no key is pressed within 10 minutes during the
programme selection process, the display lights will go off. Once the Programme
Selection knob is turned or any button is pressed, display lights will turn on again.
4.3.13 Progress of programme
Progress of a running programme can be followed from the Programme Follow-up indicator. At the beginning of
each programme step, the relevant indicator light will turn on.
C
INFORMATION
• If the "Anti-crease+" auxiliary function has been selected, "End" LED and "Anti-crease+"
LED will be on at the same time while this step is continuing.
• To end the programme while the "Anti-crease+" step is running, simply press any button or
turn the programme selection knob.
22 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
