Related Manuals for Beko WTV 7512 XMCI2
Summary of Contents for Beko WTV 7512 XMCI2
- Page 1 Washing Machine User Manual WTV 7512 XMCI2 Document Number: 2820530562_EN/ 04-10-22.(10:34)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Supplier name or trademark Beko Model name WTV 7512 XMCI2 Rated capacity (kg) Maximum spin speed (rpm) 1000 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply CAUTION! INFORMATION • Your drain house will be flooded if the • It is necessary to have 10 – 80 liters of hose comes out of its housing during water flowing from the fully open tap in water discharge. -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet 4.1.8 Initial use Before starting to CAUTION! use the product • In order to ensure that the product make sure that operates more silently and vibration- the preparations free, it must stand level and balanced are made which on its feet. -
Page 9: Sorting The Laundry
4.2 Preparation 4.2.3 Tips for energy and water saving Following information will help you use the 4.2.1 Sorting the laundry product in an ecological and energy/water- • Sort laundry according to type of fabric, efficient manner. colour, and degree of soiling and allowable •... -
Page 10: Using Detergent And Softener
4.2.6 Using detergent and softener • Wash woollens at suggested programme with special detergent made specifically for INFORMATION woollens. • Please review the programme descriptions part • When using detergent, softener, starch, for suggested programme for different textiles. fabric dye, bleach and descaling agents; •... - Page 11 If the product is equipped with a liquid Using limescale remover detergent part: • When required, use limescale removers manufactured specifically for washing machines only. Using bleaches • Select a programme with prewash and add the bleach at the beginning of the prewash. Do not put detergent in the prewash compartment.
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... -
Page 14: Main Programmes
• Synthetics • : Selectable You can use this programme to wash t-shirts, * : Automatically selected, cannot be cancelled. syntetic/cotton mix fabrics etc. Programme ** : Energy Label Programme duration is notably shorter and efficient ***: If the maximum spin speed of the machine washing performance is ensured. - Page 15 • Apply the pre-treatment chemical on your Allergy UK is the trademark of the garments directly or add it together with British Allergy Foundation. The Seal of detergent when the machine starts to take water Approval has been designed to from the main washing compartment.
- Page 16 4.3.8 Temperature selection • In the stain groups stated above, find the type of stain you want to remove and select Whenever a new programme is selected, the the quick auxiliary function selection key to recommended temperature for the selected select the relevant group.
-
Page 17: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
4.3.10 Auxiliary function selection 4.3.10.2 Functions/Programmes Select the desired auxiliary functions before Selected by Pressing the Function starting the programme. You can also select Buttons for 3 Seconds or cancel auxiliary functions suitable for the running programme without pressing the Start/ Pause button while the machine is operating. -
Page 18: Starting The Programme
To disable Child Lock: 3. Press the End Time Adjustment button and select the desired time. Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. 4. Press the Start/Pause button. The delayed end While you’re holding the button pressed for 3 time you have set will be displayed. -
Page 19: Progress Of Programme
4.3.13 Progress of programme Progress of a running programme can be WARNING! followed from the Programme Follow-up • Before opening the loading door, make sure that indicator. At the beginning of each programme there is no water in the machine to avoid flooding. step, the relevant indicator light will turn on. -
Page 20: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 21: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 22: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibres clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 23: Troubleshooting
5 Troubleshooting Loading door cannot be opened. • Loading door lock is activated because of the water level in the product. >>>Drain the water by running the Pump or Programmes do not start after the loading door is Spin programme. closed. - Page 24 Washing performance is poor: Laundry turns gray. (**) Washing machine does not rinse well. • Insufficient amount of detergent has been used over a long • The amount, brand and storage conditions of the detergent period of time. >>>Use the recommended amount of used are inappropriate.
- Page 25 Too much foam forms inside the product. (**) • Improper detergents for the washing machine is used. >>>Use detergents appropriate for the washing machine. • Excessive amount of detergent is used. >>>Use only sufficient amount of detergent. • Detergent was stored under improper conditions. >>>Store detergent in a closed and dry location.