Advertisement
1. Connection Guide
It is an overall connection application diagram, among Explosion-proof
camera, PoE Switch, PC,NVR, Smartphone, etc. Please see below.
2. Activating the Camera
Activation via Web Browser
Steps:
1. Power on the Explosion-proof camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:
The default IP address of the camera is 192.168.1.64.
For the camera enables the DHCP by default, the IP address is
allocated automatically. And you need to activate the camera via SADP
software. Please refer to the following chapter for Activation via SADP.
Solar and/or
Wireless Transmission
POE Switch
Figure 1-1 Connection diagram
3
Internet
NVR
Advertisement
