Set Up the Display
Connecting and Powering on the Display
This section describes how to set up the display.
Note: Before performing this procedure, be sure to read the "Safety Matters" on
page ⅲ.
1. Turn off the power to the computer and all connected devices, and then
unplug the computer's power cord.
2. Connect the cables as shown in the figure below.
3. For computers with HDMI connections.
Note: Lenovo recommends that users who need to use the HDMI input on their
display purchase the "Lenovo HDMI to HDMI Cable OB47070"
www.lenovo.com/support/monitoraccessories
Chapter 1 1-6