Table of Contents
Advertisement
6. Plug the power cord into the display, and then plug the display power cord
and computer cord into a grounded power outlet.
Note: A certified power cord must be used for this equipment. The installation
and/o r equipment regulations of the country concerned should be taken into
account. The certified power cable used should not be lighter than the normal
2
2
PVC cable (marked H05VV-F 3G 0.75mm
or H05VVH2-F2 3G 0.75mm
) as
specified in IEC 60227. In addition, synthetic rubber cords as specified in IEC
2
60245 (marked H05RR-F 3G 0.75mm
) should be used.
7. Use wire clips when connecting cables.
Chapter 1 1-8
Advertisement
Table of Contents
